A THC cart that won't pull is usually clogged, not dead. Most carts stop producing vapor because oil has been drawn into the center airway, because the battery contact is dirty, or because the draw is too soft to open the intake. Work through the checks below before you toss the cartridge — most stalled carts come back to life in under a minute.

how to fix a clogged cart

Key Features

Hardware matters as much as technique. Most 510-thread carts use a glass or polycarbonate tank around a ceramic or cotton-wrapped coil, with intake holes sitting at the base of the center post. Thicker oils and cold rooms make those holes harder to prime, which is why a cart that pulls fine indoors can feel completely sealed on a cold morning. Battery output plays a part too: a variable battery set near 2.5–3.3 volts warms oil gently, while a fixed high-output battery can scorch a coil and leave a burnt taste that no amount of unclogging will fix.

more on this topic

Orders ship in plain, discreet packaging with tracking, and carts are packed upright to reduce leaks in transit. If a cartridge arrives leaking, cracked, or dead on arrival, contact support with your order number and the batch code printed on the packaging and the team will arrange a replacement under the returns policy.

more on this topic

Why is my THC cart not pulling at all?

Total silence usually means no power or a fully sealed airway, so check the battery first and the intake holes second. If the battery lights up but nothing happens, a clog is the likely culprit.

related article

How do I unclog a cart without breaking it?

Warm the cart in your hands or with a hair dryer on low for 20–30 seconds, then give a short, firm pull with the battery switched off. Never poke the airway with metal, since a shifted coil or cracked glass turns a small clog into a leak.

Can a clogged cart be saved, or is it finished?

If oil still moves once the cart is warmed and the coil isn't burnt, it can almost always be saved. A lasting burnt taste combined with no airflow usually means the cartridge has reached the end of its life.